By Tom Knighton
Ruger announced earlier today that it was issues a safety bulletin for certain precision rifles due to a concern regarding the firing pin being impeded by the aluminum bolt shroud. Rather than simply prevent the weapon from firing properly, however, it also appears that the defect may also cause the weapon to fire when the bolt is lifted.
Sturm, Ruger & Company, Inc. (NYSE-RGR) has issued a Safety Bulletin for certain Ruger Precision Rifles. Ruger recently learned that some Ruger Precision Rifles may experience interference between the aluminum bolt shroud and the cocking piece (also known as the firing pin back). In rare instances, the interference can disrupt the firing mechanism and cause it to not function properly. This interference can potentially lead to light primer strikes or, in extreme cases, the rifle may not fire when the trigger is pulled. If the rifle fails to fire when the trigger is pulled, it may fire when the bolt handle is subsequently lifted. In rifles where this condition exists, the issue often resolves itself as the parts wear and the interference is reduced. Therefore, rifles that have fired more than 100 rounds with no issues or concerns are unlikely to be affected, and no additional action is necessary.
Although only a small percentage of rifles appear to be affected and the Company is not aware of any injuries, Ruger is firmly committed to safety and is offering free replacement aluminum bolt shrouds for affected rifles in order to eliminate the possibility of such interference. Ruger Precision Rifles (regardless of caliber) that have an aluminum bolt shroud and fall within the following serial number ranges are potentially affected: 1800-26274 to 1800-78345 or 1801-00506 to 1801-30461.
Not all rifles within these serial number ranges are affected; this Safety Bulletin does not Click to see the original article